Transmitters - Page 5

The FESTO PENV-A-W-12-LCD-RB is a pressure transducer from the PENV series designed to provide reliable pressure measurement in industrial applications. Operating within a voltage range of 15 to 30 VDC, it delivers a 4-20 mA output signal, making it compatible with a wide range of control systems. This model accurately measures pressures from 0 to 10 bar, ensuring precise monitoring in various processes. Distributed by BSP Automation, this transducer offers a dependable solution for integrating pressure sensing into your automation setup.

The FESTO SDE5-D10-C-Q6E-P-K is a reliable pressure sensor designed for measuring relative pressure within a range of 0 to 10 bar. Part of the SDE5 series, this sensor features a PNP output and includes a normally closed contact, making it suitable for precise control and monitoring in pneumatic systems. It operates on a supply voltage from 15 to 30 VDC and comes with a 2.5-meter cable for straightforward wiring. The sensor connects via a QS-6 pneumatic fitting, ensuring compatibility with various setups. This pressure sensor is available through BSP Automation, providing an accessible option for your automation needs.

The FESTO SDE5-D10-0-C4-P-M8-4X is a reliable pressure sensor designed to operate within a 15 to 30-volt range, typically powered by 24 VDC. Featuring a 3-pin connection, this sensor provides accurate pressure measurements essential for various automation applications. Distributed by BSP Automation, it integrates seamlessly into industrial setups where precise monitoring and control of pressure are required.

The FESTO SDE5-B2-FP-Q6-P-M8 is a pressure sensor from the SDE5 series designed for reliable pressure measurement in various applications. Featuring a compact M8 3-pin connector and operating within a voltage range of 15 to 30 VDC, this sensor is capable of accurately detecting pressures up to 1 bar. Distributed by BSP Automation, the SDE5-B2-FP-Q6-P-M8 offers a straightforward solution for integrating precise pressure monitoring into your automation systems.

The FESTO SDE5-B2-FP-Q4-P-M8 is a pressure sensor designed for precise measurement in various industrial applications. Part of the SDE5 series, this sensor features an M8 3-pin connector and operates within a voltage range of 15 to 30 VDC. It is calibrated to measure pressure up to 1 bar, making it suitable for processes that require accurate low-pressure monitoring. This reliable device is available through BSP Automation, providing a seamless solution for your automation needs.

The FESTO SPAE-P10R-F-PNLK-2.5K is a versatile pressure sensor designed for measuring pressures from 0 to 10 bar, withstanding overloads up to 15 bar. Operating on a 18 to 30 VDC power supply, this sensor provides a maximum output current of 100 mA. It features a 3-wire configuration and offers a switchable contact mode, allowing users to select between normally closed (NC) and normally open (NO) contacts to suit different control requirements. With an IP40 rating, it is well suited for environments where protection against solid objects is necessary but not against water. This pressure sensor is available through BSP Automation, providing reliable performance for various industrial automation applications.

The FESTO SFAH-200U-Q8S-PNLK-PNVBA-L1 is a unidirectional flow sensor designed for precise measurement and control in automation systems. This sensor handles flow rates up to 200 liters per minute and features a push-in connector compatible with 8 mm outer diameter tubing, making installation straightforward. Operating on a voltage range of 22 to 26 VDC, it provides a 4-20 mA output signal and offers flexibility with two switchable PNP or NPN outputs. The device comes equipped with an L1 plug for reliable connectivity. Distributed by BSP Automation, this flow sensor is an excellent choice for accurate flow monitoring in various industrial applications.

The FESTO SPTW-P50R-G14-A-M12 is a reliable position transmitter designed for accurate measurement and feedback in automation systems. This device delivers precise position sensing, making it suitable for a variety of industrial applications where monitoring linear or rotary movement is essential. You can find this position transmitter available through BSP Automation, providing a trusted option for integrating dependable sensing solutions into your setup.

The FESTO SPAN-B-B11R-G18M-PN-L1 is a reliable pressure sensor designed for precise monitoring and control in industrial applications. This sensor delivers accurate pressure measurements, helping to maintain system performance and safety. Distributed by BSP Automation, it’s a solid choice for integration into various automation setups where dependable pressure sensing is essential.

The FESTO SFAM-62-5000L-TG12-2SA-M12 is a flow sensor designed for precise measurement of fluid flow rates. It features a threaded mounting for secure installation and can accurately monitor flow within a range starting at 50 liters per minute, extending up to 5000 liters per minute. This makes it suitable for applications that require reliable flow measurement across a wide spectrum. The device is available through BSP Automation, providing a dependable solution for your automation needs.