Drive Interfaces & Operators

The Siemens product with catalog number F01 is a follow-up release for the SIMOVERT MASTERDRIVES motion control system, designed to enhance the technological software components labeled "PIN" and "FID" for the device unit. This update is particularly important if you’re managing complex motion control setups, as it adds refinements that improve system performance and reliability. For the "FID" feature, be sure to review parameters U976 Index 1 and 2 to understand the full scope of the update. Additional details and guidance can be found in the Motion Control Compendium, specifically in the control system flowchart 850. This product is available through BSP Automation, ensuring easy access to support and distribution.

The Siemens C98043-A1249-L1-08 is a SIMOVERT relay module designed to provide reliable switching functions within industrial automation systems. This module is engineered to integrate seamlessly with drive control setups, ensuring efficient and precise operation. Available through BSP Automation, it offers a dependable solution for managing relay-based tasks in a range of control applications.

The Siemens 6SL3300-7TE32-6AA0 is an active interface module designed to handle three-phase power with a current rating of 260 amps. It operates within a voltage range of 380 to 480 VAC at both 50 and 60 Hz frequencies. This module features internal air cooling to ensure reliable thermal management during operation. Although this specific model has been discontinued since November 2016, it may still be available through BSP Automation for applications requiring this type of hardware.

The Siemens catalog number 6SL3255-0AA00-4JC1 corresponds to the SINAMICS G120 Intelligent Operator Panel (IOP), designed as an optional interface for various SINAMICS drives such as the G120, G120P, G110M, G110D, G120D, G120C, S110, as well as the ET 200S and ET 200 PRO series. Although this particular model has been discontinued since April 2019, it was widely used to provide enhanced control and monitoring capabilities for these drive systems. For those looking for an updated alternative, the successor model 6SL3255-0AA00-4JA2 is available. This product and its replacements are distributed by BSP Automation, offering reliable solutions for industrial automation needs.

The Siemens 6SL3255-0AA00-4BA1 is a G110 Basic Operator Panel designed for use with SINAMICS AC drives, specifically compatible with G110 and G120 series. This panel supports drives up to 0.75 kW and features an IP20 protection rating, making it suitable for standard industrial environments. It serves as an updated replacement for the previous 6SL3255-0AA00-4BA0 model. Distributed by BSP Automation, this operator panel provides a reliable interface for monitoring and controlling your AC drive systems effectively.

The Siemens 6SL3040-0PA00-0AA0 is a Control Unit Adapter CUA31 designed for use with Power Modules PM340. It operates at 24 VDC with a current rating of 0.6 amps. This adapter provides a reliable interface to ensure seamless communication and power transfer between components. Note that this model has been succeeded by the updated version 6SL3040-0PA00-0AA1. You can find this product through BSP Automation, who supply a range of industrial automation solutions.

The Siemens 6SE7033-2EG30 is a SIMOVERT SC converter chassis unit designed for use in industrial drive systems. This chassis supports input voltages between 380 and 460V AC at 50/60Hz and is rated for a nominal current of 262 A, with a power capacity of up to 132 kW. Its IP00 rating indicates that it’s intended for installation inside a protective enclosure to ensure safety and reliability. For those looking to expand or customize the base drive, additional options are available—just reach out to the BSP Automation team for more details.

The Siemens 6SE7033-2EG20-Z is a SIMOVERT VC converter chassis unit designed for three-phase power systems operating between 380 and 460 volts at 50/60 Hz. This unit delivers a nominal power rating of 160 kW with a current capacity of 315 A. It's built as a base drive unit, providing a solid foundation for various customization options to suit specific application needs. This product is available through BSP Automation, offering reliable access to Siemens automation components.

The Siemens 6SE7033-2EG10-Z is a SIMOVERT Masterdrives converter unit designed for industrial motor control applications. This chassis unit operates with a three-phase power supply ranging from 380 to 460 volts at 50/60 Hz, supporting a nominal current of 315 A and delivering up to 160 kW of power. Its IP00 rating means it’s intended for installation within a protective enclosure. For those looking to integrate this converter into a larger system or requiring additional features, options are available to tailor the drive to specific needs. This Siemens converter unit is available through BSP Automation, offering reliable access to quality automation components.

The Siemens 6SE7033-2EG10 is a SIMOVERT MASTERDRIVES FC converter chassis designed for three-phase power systems operating between 380 and 460 volts at 50/60 Hz. With a nominal current rating of 315 amps and a power capacity of 160 kW, this unit serves as a reliable base drive for various industrial applications. For those seeking to customize their setup with additional options, assistance is readily available. This product is available through BSP Automation, offering a dependable solution for your automation needs.