Semiconductors

The Siemens 6SL3310-1PE34-6AA0 is a SINAMICS G120P PM330 power module designed for three-phase input voltages ranging from 380 to 480 V AC, with a frequency tolerance of 47 to 63 Hz. This module delivers reliable performance with a power rating of up to 200 kW under high overload conditions—able to handle 150% load for 60 seconds and 100% load for 240 seconds. For lower overload demands, it can provide up to 250 kW at 110% load for 60 seconds and 100% load for 240 seconds. The device operates effectively within ambient temperatures from 0 to 40 degrees Celsius. Distributed by BSP Automation, this power module is suitable for applications that require robust and flexible drive solutions without an integrated brake chopper.

The Siemens 6SL32250SE222UA1 is a frequency converter designed specifically for use with the ET 200S system. This device enables precise control of motor speed and torque, making it ideal for applications requiring flexible and efficient motor management. Distributed by BSP Automation, it offers reliable performance and seamless integration within industrial automation setups.

The Siemens 6SL3225-0SE24-0UA1 is a frequency converter designed specifically for the ET 200S system. This power module, rated at 4.0 kW (5.0 HP), operates within a voltage range of 380 to 480 VAC and a frequency range of 47 to 63 Hz. It features an intelligent power module (IPM25) that supports efficient energy management. Additionally, the module can be expanded with a brake control unit to enable power recovery, enhancing overall system performance. This frequency converter is available through BSP Automation, providing a reliable solution for applications requiring precise motor control.

The Siemens 6SL3225-0BE37-5UA0 is a SINAMICS G120 power module PM250 designed for three-phase power supply ranging from 380 to 480 volts AC, with a frequency tolerance between 47 and 63 Hz. This unit is engineered to deliver high overload capacity, handling up to 75 kW at 200% overload for 3 seconds, 150% for 57 seconds, and 100% for 240 seconds, making it suitable for demanding industrial applications. Additionally, it supports a light overload mode, providing up to 90 kW at 150% for 3 seconds, 110% for 57 seconds, and continuous 100% for 240 seconds. The module operates efficiently within an ambient temperature range from 0 to 50 degrees Celsius and does not include a built-in filter or regeneration capability. You can find this power module available through BSP Automation, offering reliable support for your automation needs.

The Siemens 6SL3225-0BE35-5UA0 is a SINAMICS G120 Power Module PM250 designed for use without a filter and supports regeneration capabilities. Operating on a three-phase supply voltage of 380 to 480 V AC (±10%) at a frequency range of 47 to 63 Hz, this module handles high overload conditions efficiently. It can deliver 55 kW with 200% overload for 3 seconds, 150% for 57 seconds, and 100% for up to 240 seconds at ambient temperatures between 0 and 50 degrees Celsius. Additionally, the module supports light overloads, providing up to 75 kW with 150% overload for 3 seconds, 110% for 57 seconds, and 100% for 240 seconds under the same temperature conditions. This robust power module, available through BSP Automation, is suitable for demanding industrial applications requiring reliable performance and flexibility.

The Siemens 6SL3225-0BE35-5AA0 is a SINAMICS G120 power module, model PM250, designed for robust industrial applications. This unit operates on a three-phase supply voltage ranging from 380 to 480 volts AC with a frequency of 47 to 63 Hz. It features an integrated Class A filter and supports regenerative functionality, enhancing energy efficiency by allowing energy to be fed back into the grid. The module can handle high overloads, delivering up to 55 kW for short durations of 200% overload over 3 seconds, 150% for 57 seconds, and 100% sustained up to 240 seconds. For lighter overload conditions, it supports 75 kW at 150% for 3 seconds and 110% for 57 seconds. The device is rated to operate reliably within ambient temperatures from 0 to 50 degrees Celsius. This Siemens power module, available through BSP Automation, is well-suited for demanding drives that require flexible power handling and high performance.

The Siemens 6SL3225-0BE34-5UA0 is a SINAMICS G120 Power Module PM250 designed for use without a filter and supports regenerative capabilities. It operates on a three-phase power supply ranging from 380 to 480 volts AC with a frequency between 47 and 63 Hz. This power module can handle high overload conditions, delivering up to 45 kW at 200% overload for 3 seconds, 150% for 57 seconds, and 100% for 240 seconds, within an ambient temperature range of 0 to 50 degrees Celsius. In lighter overload scenarios, it can supply up to 55 kW at 150% for 3 seconds, 110% for 57 seconds, and 100% for 240 seconds. Distributed through BSP Automation, this module is well-suited for applications requiring robust, reliable power performance and flexible handling of overload conditions.

The Siemens 6SL3225-0BE31-8UA0 is a power module designed for three-phase systems operating between 380 and 480 VAC with a frequency range of 47 to 63 Hz. This unit delivers a power rating of 18.5 to 22 kW and comes without an integrated filter, offering flexibility depending on your application requirements. Distributed by BSP Automation, this module is a reliable choice for industrial setups that demand efficient power management within the specified voltage and frequency ranges.

The Siemens 6SL3223-0DE38-8BA0 is a SINAMICS G120P power module PM230 designed to deliver reliable performance in demanding industrial environments. This power module features a built-in Class B filter and offers IP55/UL Type 12 protection, ensuring durability and resistance to dust and water ingress. It operates on a three-phase supply voltage between 380 and 480V with a frequency range of 47 to 63 Hz. The module is capable of handling low overloads up to 90 kW at 110% for 60 seconds and 100% for 240 seconds, making it suitable for applications requiring short-term bursts of additional power. Designed for ambient temperatures from 0 to 40 degrees Celsius, the unit measures 915 x 410 x 416 mm (H x W x D) and is provided without a control unit or power adapter. Distributed by BSP Automation, this power module is a versatile choice for integrating efficient motor control into your automation setup.

The Siemens 6SL3223-0DE38-8AA0 is a SINAMICS G120P power module PM230 designed for reliable motor control applications. This unit features an integrated class A filter and offers protection rated at IP55 and UL Type 12, making it suitable for demanding industrial environments. It operates on a three-phase supply voltage of 380 to 480 V AC, with a frequency range of 47 to 63 Hz. The module supports a low overload capacity of 90 kW, allowing 110% output for 60 seconds or 100% output for 240 seconds, ensuring stable performance under varying load conditions. It is built to function within an ambient temperature range from 0 to 40 °C. The compact dimensions (915 x 410 x 416 mm) allow for flexible installation. This power module is supplied without a control unit or power adapter and is available through BSP Automation, providing a dependable option for your drive system needs.