Control Units - Page 3

The Pepperl+Fuchs RL28-55-3018/35/44/47/115B is a retroreflective sensor designed for reliable object detection in various industrial settings. Operating on a 10-30 VDC power supply, this sensor features a light-on switching mode and provides two PNP signal outputs for seamless integration with control systems. It offers a detection range of up to 26 meters, with a quick response time of 2 milliseconds to ensure timely and accurate sensing. The sensor’s status is indicated by a green LED for easy monitoring. Distributed by BSP Automation, this model combines precision and efficiency to support demanding automation applications.

The Pepperl+Fuchs WCS1-P2500-AW is a reliable position controller designed for precise control applications. Operating within a voltage range of 10 to 40 V and a temperature range from 0 to 55°C, this device ensures stable performance in demanding environments. Its robust construction meets IP54 protection standards, offering resistance against dust and splashing water. Distributed by BSP Automation, this position controller is a solid choice for industrial automation setups requiring dependable and accurate position management.

The Pepperl+Fuchs VAA-4E-G2-ZE is an interface output module designed to handle four input signals. This compact device is well-suited for integrating various field signals into control systems, ensuring reliable and accurate signal transmission. Available through BSP Automation, the VAA-4E-G2-ZE offers straightforward installation and robust performance for a range of industrial automation applications.

The Pepperl+Fuchs VAA-4A-K3-R is an AS-Interface actuator module designed to provide four output channels. This K3 module is built to integrate smoothly into AS-Interface networks, offering reliable control for actuator signals. Available through BSP Automation, the VAA-4A-K3-R combines straightforward functionality with robust performance, making it a practical choice for industrial automation applications.

The Pepperl+Fuchs VBG-PB-K20-DMD-BV is an AS-Interface gateway designed to facilitate communication between two AS-Interface networks and a PROFIBUS DP system. This gateway supports PROFIBUS DP V1, offering flexible and reliable data exchange with transmission speeds ranging from 9.6 kbit/s up to 12 Mbit/s over an RS-485 interface. It includes advanced features such as earth fault detection and AS-Interface noise detection to ensure system integrity and diagnose connectivity issues. Operating at a voltage of 500 V, this device provides a robust solution for integrating AS-Interface segments into PROFIBUS DP environments. Distributed by BSP Automation, the VBG-PB-K20-DMD-BV is a dependable component for enhancing industrial network interoperability.

The Pepperl+Fuchs SLC30-1500-R/133 is a reliable light curtain designed to enhance safety and efficiency in industrial environments. This sensor system helps detect the presence of objects or personnel, making it ideal for safeguarding machinery or access points. Distributed by BSP Automation, the SLC30-1500-R/133 offers dependable performance and straightforward integration into various automation setups.

The Pepperl+Fuchs catalog number SINGLE DOCK FOR I.ROC CI70 - EX is a specialized docking station designed for the I.ROC CI70 series of hazardous area mobile computers. This dock provides a secure and efficient way to connect and charge the device while maintaining compliance with explosion protection standards. Distributed by BSP Automation, it supports seamless integration in industrial environments where safety and reliability are critical.

The Pepperl+Fuchs WE77/EX2-OT is a switch relay control designed to operate with a 110 VAC power supply at a frequency range of 45 to 65 Hz. It features a low current draw of 8 to 10 mA, making it suitable for efficient control applications. This reliable component is available through BSP Automation, offering a solid solution for industrial control systems where precise switching is required.

The Pepperl+Fuchs KFD0-CS-EX2.51 is a 24VDC current driver and repeater designed to provide reliable signal transmission in hazardous environments. This two-channel isolated barrier ensures safe and stable connection by electrically separating input and output circuits, minimizing interference and enhancing system integrity. Distributed by BSP Automation, the KFD0-CS-EX2.51 is well-suited for applications requiring secure signal isolation and consistent current driving capabilities.

The Pepperl+Fuchs K-ADP1 is an interface adapter cable designed for use with KFD2-UT2 temperature converters. This RS-232 cable, measuring 3 meters in length, provides a reliable connection for data transmission and device communication. Distributed by BSP Automation, the K-ADP1 ensures seamless integration and ease of use in industrial temperature sensing applications.