General Transmitters - Page 7

The Endress Hauser CM442-CDM1A1F011B is a versatile transmitter designed to work with a single digital sensor. It features two output signals, configurable as either 0/4-20 mA, providing flexible integration with various control systems. The device operates on a standard power supply range of 100 to 230 VAC at 50/60 Hz, supporting common industrial power setups. With its NPT threaded cable entry, the transmitter allows for secure and straightforward wiring connections. Distributed by BSP Automation, this transmitter is well-suited for applications requiring reliable sensor data conversion and signal transmission.

The Endress Hauser CM442-AAM2A1F011A+AA is a reliable transmitter designed for a wide range of industrial applications. Operating on a power supply of 100 to 230 VAC at 50/60 Hz, it consumes 55 VA, ensuring efficient performance. This transmitter supports a standard 0/4-20 mA output signal, making it compatible with most process control systems. Distributed by BSP Automation, this model is well-suited for users seeking dependable measurement and signal transmission in their automation setups.

The Endress Hauser CM442-AAM2A1F060A+Z1 is a multiparameter transmitter designed for liquid analysis applications. This four-wire device supports two digital sensors and provides dual 20mA outputs, making it suitable for precise monitoring in non-hazardous environments. It operates on 24 VDC power and features metric cable entry along with an enclosed housing for reliable protection. You can find this transmitter available through BSP Automation, offering a robust solution for various process measurement needs.

The Endress Hauser CM442-AAM2A1F011A is a reliable transmitter designed to operate on a power supply of 100-230 VAC at 50/60 Hz, with a power consumption of 55 VA. It features a 0/4-20 mA output signal, commonly used for accurate process measurement and control in industrial automation systems. This model is available through BSP Automation, offering a robust solution for various instrumentation needs.

The Endress Hauser CM442-AAM1CGF011A is a reliable transmitter designed to operate efficiently within a voltage range of 100 to 230 volts at 50/60 Hz frequency, drawing 55 VA of power. It provides a standard 4-20 mA output signal, making it compatible with a wide range of industrial control systems. This transmitter is available through BSP Automation, ensuring easy access for your automation needs.

The Endress Hauser CM442-6PD1/0 is a versatile transmitter designed for liquid analysis in process control applications. Known as the Liquiline CM442, this device supports multiple parameters and channels, allowing it to handle input from one digital sensor effectively. It features two output signals (0/4-20 mA with HART communication) and operates on a standard power supply of 100-230 VAC at 50/60 Hz. Distributed by BSP Automation, this transmitter provides reliable and flexible measurement capabilities for a range of industrial processes.

The Endress Hauser CM442-2DL1/0 is a versatile multiparameter, multichannel analyzer designed for precise process control applications. This device allows you to monitor several key water quality parameters simultaneously, making it an efficient solution for complex measurement needs. Distributed by BSP Automation, the CM442 offers reliable performance and flexibility, fitting seamlessly into various industrial environments where accurate and continuous monitoring is essential.

The Endress Hauser CPM152-A1A1A10A is a reliable conductivity transmitter designed for precise measurement in a range of process conditions. It operates on 115V with a frequency of 47/64 Hz and consumes 10 VA of power. This transmitter accepts input signals from pH sensors within a range of -2 to +16 pH, millivolt inputs up to ±1500 mV, and temperature readings between -20 and +150°C. For output, it provides two 0/3 to 20 mA signals suitable for loads up to 600 ohms, along with two relay contacts for additional control functions. This device is available through BSP Automation, ensuring easy access for your automation projects.

The Endress Hauser CPM253-PR1010 is a reliable transmitter designed to operate on a 115 VAC power supply with a frequency of 50/60 Hz and a power consumption of 7.5 VA. This unit is well-suited for various industrial applications requiring accurate signal transmission. Distributed by BSP Automation, the CPM253-PR1010 offers dependable performance and straightforward integration into existing control systems.

The Endress Hauser CPM223-PS3010 is a reliable Liquisys-M pH/ORP transmitter designed to provide accurate measurement of pH and oxidation-reduction potential in a variety of industrial applications. Operating on 115 VAC at 50/60 Hz, this transmitter features a measurement range of ±1500 mV, making it suitable for precise monitoring in challenging environments. Distributed by BSP Automation, the CPM223-PS3010 offers a durable and efficient solution for process control and water treatment systems.