PLC Communication Adapters - Page 2

The Allen Bradley 1756-CNB is a ControlLogix communications module designed to serve as a ControlNet bridge. It supports data transfer speeds up to 5 Mbps and can manage between 40 to 48 ControlLogix communication connections. This module is well-suited for integrating ControlNet networks within ControlLogix systems, providing reliable and efficient communication. Distributed by BSP Automation, the 1756-CNB offers a robust solution for managing network traffic in complex automation environments.

The Allen Bradley 1492-CM1746-M04 is a conversion module designed to facilitate communication between SLC 500 and 5069 CompactLogix systems. Specifically, it allows modules like the 1746-OW16 to interface seamlessly with the 5069-OW16, enabling easier integration during system upgrades or expansions. This conversion module is available through BSP Automation, providing a reliable solution for users transitioning between these two platform generations.

The 1771-IGD series conversion modules are designed to seamlessly connect older 1771 digital I/O modules, such as the IGD, OAD, OBD, OBDS, OGD, OMD, and OND models, with the newer 1756 series digital I/O modules like IG16, OA16, OB16E, OG16, and ON8. Distributed by BSP Automation, these modules provide a reliable interface that simplifies system upgrades and integration, helping to extend the lifespan of existing equipment while maintaining performance and compatibility across different hardware generations.

The Allen Bradley 1794-AENTRXT is a dual-port communications adapter designed for Ethernet/IP networks, supporting up to eight FLEX I/O modules. This device operates on 24 V DC power with a current draw of 640 mA, consuming roughly 6.1 watts. The FLEX I/O system it's part of is known for its versatility, allowing you to combine different types of I/O—digital, analog, HART analog, and specialty inputs and outputs—within the same setup. Each module can handle between 4 and 32 points, giving you considerable flexibility to tailor your configuration. Distributed by BSP Automation, this adapter provides a reliable interface for integrating diverse I/O modules into your industrial network, making it easier to manage various signals and sensors efficiently.

The Allen Bradley 1492-CM1771-LA001 is a conversion module designed to interface 1771-IFE and 1771-IFF input modules with 1756-IF16 modules. It supports single-ended current and voltage signals, making it a practical solution for adapting legacy equipment to modern control systems. This module helps streamline system upgrades by ensuring compatibility between different module types. Distributed by BSP Automation, the 1492-CM1771-LA001 provides a reliable and efficient way to bridge older and newer Allen Bradley components in industrial automation setups.

The Allen Bradley 1492-CM1771-LD004 is a conversion module designed to interface legacy digital input modules, such as the 1771-ID16 and 1771-IQ16, with newer 1756 series digital I/O modules including the 1756-IA16I, 1756-IH16I, and 1756-IB16I. This module facilitates seamless integration within control systems, allowing for efficient transitions between different module families. Distributed by BSP Automation, the 1492-CM1771-LD004 helps maintain system flexibility while upgrading or expanding your automation setup.

The Allen Bradley 1492-CM1771-LD007 is a conversion module designed to facilitate seamless integration between older 1771-series digital I/O modules and the newer 1756 series I/O modules. This adapter supports a range of 1771 modules, including types IA, IB, IC, ID, IH, IM, IN, IQ, and IT, allowing them to interface smoothly with 1756-series modules such as IA16, IB16, IC16, IA16I, IM16I, IN16, and IB16I. Distributed by BSP Automation, this conversion module provides a practical solution for upgrading or expanding existing control systems without the need to replace all legacy hardware at once, making it an efficient choice for modernizing your digital I/O setups.

The Allen Bradley 5094-AEN2TRXT is an Ethernet adapter designed to support up to 16 modules, providing reliable network connectivity for your system. This device facilitates seamless communication between your automation components and Ethernet networks, ensuring efficient data exchange and control. Distributed by BSP Automation, the 5094-AEN2TRXT is a solid choice for enhancing industrial communication infrastructure with proven performance and compatibility.

The Allen Bradley 1747-SN is a remote scanner module designed for use with SLC 5/02 and higher controllers. It features an RS-232/DF1 splitter, allowing efficient communication and control within your automation setup, and operates at 600 mA. While the SLC 500 series, including this model, has been a reliable choice in many applications over the years, newer systems such as the CompactLogix 5370 and 5380 platforms are recommended for modern upgrades. This scanner module is available through BSP Automation, providing a dependable option for maintaining or extending existing SLC 500 control solutions.

The Allen Bradley 1492-CM1746-M03 is a reliable conversion module designed to simplify signal integration and enhance system compatibility. This module helps bridge different communication standards or device formats, making it easier to connect various components within your automation setup. Distributed by BSP Automation, the 1492-CM1746-M03 offers a straightforward solution for adapting signals without adding complexity, supporting smoother operation and maintenance in industrial environments.