Allen Bradley

The Allen Bradley 1492-TBNH/A is a plug-in terminal module designed for convenient wiring connections without including any cables. It features secure screw terminals, allowing for reliable and easy installation in various control panel setups. This terminal module is available through BSP Automation, supporting efficient and organized electrical wiring in industrial applications.

The Allen Bradley 1492-RXIM24-8R is a digital relay expander designed to enhance your control system’s relay capacity. This unit features eight 24V DC relays, each equipped with coil-side diagnostic LEDs, making it easier to monitor relay status and troubleshoot if needed. The device includes a field-removable terminal block, which simplifies wiring and maintenance tasks in the field. You can find this reliable relay expander available through BSP Automation, offering a practical solution for expanding relay outputs in your automation setup.

The Allen Bradley 1492-RIFM40FH-2 is a digital interface module designed for flexible and reliable connectivity in control systems. It features a removable terminal block that allows for easy field wiring and maintenance. This module includes a 40-pin cable header and offers feed-through connections with extra terminals, all housed in a compact, low-profile design. Rated for 132 VAC/DC, it’s well-suited for integrating multiple signals within industrial automation setups. Distributed by BSP Automation, the 1492-RIFM40FH-2 provides a practical solution for streamlining connections while maintaining accessibility for troubleshooting and system updates.

The Allen Bradley 1492-RIFM40F-2 is a digital interface module designed for wiring system applications. This module features a 40-pin cable header with field-removable terminal blocks, allowing for flexible and convenient wiring connections. It supports feed-through wiring and includes additional terminals to accommodate complex setups. Rated for 132 VAC/DC, this interface module is well-suited for integrating digital signals within control systems. Distributed by BSP Automation, the 1492-RIFM40F-2 offers reliable performance in a compact and accessible form factor.

The Allen Bradley 1746-OB16E is a reliable output module designed for use with the SLC 500 series. This 16-point module supports up to 8 amps per point and operates within a voltage range of 10 to 30 VDC. It features electronic protection to help safeguard your system against overloads and faults. You can find this module available through BSP Automation, ensuring a dependable supply for your automation projects.

The Allen Bradley 1746-OAP12 is a high-current output module designed for use with the SLC 500 system. This module features 12 output points and supports both 120 and 240 VAC voltages, making it suitable for controlling a range of devices in industrial automation setups. Distributed by BSP Automation, the 1746-OAP12 offers reliable performance for applications requiring robust output capabilities.

The Allen Bradley 1746-OA16-CC is a 16-point output module designed for use with SLC 500 systems. It operates within a voltage range of 120 to 240 V AC and features a conformal coating that helps protect the module from environmental factors such as moisture and dust. This output module is well-suited for industrial automation applications where reliable performance and durability are important. Distributed by BSP Automation, the 1746-OA16-CC offers a dependable solution for expanding output capabilities in your control setup.

The Allen Bradley 1746-OA16 is an I/O module designed to provide 16 output channels, compatible with 85 to 265 volts AC. It supports a backplane current load of 370 mA, making it suitable for general-purpose applications that require reliable 120/240-volt output power. This module is well-suited for systems needing multiple output points with robust voltage handling. Distributed by BSP Automation, the 1746-OA16 offers a dependable solution for expanding your control system’s output capabilities.

The Allen Bradley 1746-NT4 is a 4-point analog input module designed for thermocouple and millivolt signals. It supports a variety of thermocouple types, including J, K, T, B, E, R, S, and N, making it versatile for different temperature measurement applications. Additionally, it features cold junction compensation (CJC) to ensure accurate readings. This module is compatible with the SLC 500 system and can handle input ranges of ±50 or 100 millivolts. Distributed by BSP Automation, the 1746-NT4 is a reliable choice for precise temperature monitoring in industrial settings.

The Allen Bradley 1746-NR8 is an 8-channel RTD input module designed for the SLC-500 system. This open-style module supports precise temperature measurement by accommodating multiple RTD sensors simultaneously. It operates with a current rating of 55 mA at 24 VDC and 100 mA at 5 VDC, ensuring reliable performance within your control setup. This product is available through BSP Automation, providing a dependable option for integrating accurate temperature inputs into your automation projects.