Variable Frequency Drives

The VPL Low Inertia Motor features a 480 Volt AC supply and a 100 mm bolt circle frame size, designed for high-speed applications with a rated speed of 6000 RPM. It includes two magnet stacks and an M winding configuration, delivering efficient performance with low rotational inertia. This motor is equipped with a high-resolution digital encoder offering 18-bit single-turn and 12-bit multi-turn feedback, providing precise position sensing. Additionally, it has a keyless shaft for easy coupling and a SpeedTec right-angle DIN connector that can be rotated up to 325° for flexible installation. This model does not include a holding brake. This product is available through BSP Automation, supporting your industrial automation needs with reliable components.

The Allen Bradley 2198-H040-D-T is a connector kit designed for busbar applications, specifically suited for Frame 1-2 followers. This DC bus T-connector measures 55mm by 2, providing a reliable solution for connecting bus-bar systems. Distributed by BSP Automation, this kit offers a practical and efficient way to ensure secure electrical connections within your setup.

The Kinetix Low Inertia Servo is designed for high-performance applications, featuring a 480 V AC power rating and a 75 mm bolt circle for mounting. It offers a dual magnet configuration and operates at speeds up to 3500 RPM, supporting multiturn feedback with a keyed shaft for secure mechanical connection. Distributed by BSP Automation, this servo is well-suited for precise motion control tasks where rapid acceleration and deceleration are required.

The Allen Bradley VPL-B0631U-PJ12AA is a servo motor designed for applications requiring very low inertia. This motor operates at 480 volts AC and features a 63 mm bolt circle frame with a single magnet stack and U winding configuration. It is rated for speeds up to 8,000 RPM and includes a high-resolution digital encoder with 18-bit single-turn and 12-bit multi-turn capabilities, providing precise position feedback. The motor comes with a keyed shaft and a single SpeedTec DIN connector, and it does not include a holding brake. This reliable servo motor is distributed by BSP Automation, offering a solid choice for motion control tasks where responsiveness and precision are essential.

The Allen Bradley 2094-BMP5-M is a power module designed for Kinetix automation systems, operating at 400VAC with a 4 Amp capacity and delivering up to 1.8 kW of power. This module is ideal for applications requiring reliable and efficient power management within motion control setups. Distributed by BSP Automation, it provides a robust solution for integrating into your automation infrastructure, ensuring consistent performance and ease of use.

The Allen Bradley drive with catalog number 20G1AND156JN0NNNNN is a PowerFlex 755 model designed to deliver reliable and versatile motor control. This drive supports currents up to 156 amps, handling motors rated at 125 horsepower for normal duty and 100 horsepower for heavy-duty applications, operating within a voltage range of 380 to 480 volts AC. It features an open, air-cooled design with a frame size 6, includes a precharger, filtered input, and comes without DC terminals or a Human Interface Module installed. PowerFlex 755 drives are known for their user-friendly setup, flexible application options, and robust performance. They offer a variety of control and hardware configurations, along with optional embedded safety functions to meet diverse industrial needs. These drives are typically used to manage motors in systems such as pumps, fans, and conveyors. Additionally, their integrated motion capabilities over EtherNet/IP allow seamless networking with other devices like Kinetix drives, supporting advanced topologies including ring, linear, and star configurations. This setup also provides high availability through fault-tolerant Device Level Ring (DLR) connectivity. This Allen Bradley PowerFlex 755 drive is available through BSP Automation, ensuring you have access to reliable solutions for your motor control requirements.

The Allen Bradley 2090-CSWM1DE-18AA10 is a 2090-Series cable assembly designed for single DSL power and feedback connections. It features a single SpeedTec DIN connector with a flying lead at the 5700 drive end, utilizing 18 AWG standard, non-flex wire. With a 10-meter cable length, this component ensures reliable signal transmission in automation setups. This product is available through BSP Automation, providing a dependable solution for your drive system wiring needs.

The Allen Bradley 2198-H070-ADP-IN is a Shared Bus Connector Kit designed for the Kinetix 5500 series, specifically for Frame Size 3. This kit is intended for use with the first drive in a multi-axis system and includes essential connectors such as the AC input, DC bus, and control power input. Distributed by BSP Automation, it provides a reliable and efficient solution for integrating multiple drives in complex automation setups.

The Allen Bradley 2090-KPB47-12CF is a cable flange designed for bulkhead mounting, compatible with both threaded and Speedtec power connectors. This component provides a secure and reliable interface for power connections in industrial environments. Distributed by BSP Automation, it offers a robust solution for managing cable installations where durability and ease of integration are important.

The MPM Medium-Inertia Servo Motor, rated for 480 Volt AC and 1500 RPM, features a single-turn high-resolution encoder and a keyed shaft extension for precise control. Distributed by BSP Automation, this motor is designed to handle heavier loads and higher inertia, making it suitable for demanding industrial applications. It includes IEC metric mounting dimensions and a rotatable SpeedTEC DIN connector, allowing for flexible installation and easier cable management. This right-angle, 180° rotatable quick-connect design helps streamline setup without the need for a brake, and the motor also comes with free mounting holes (Type FF) to further simplify integration into your systems.